HLP Series   Electric - Belt Drive
  1. LP-Gas fired natural draft with aspirating type burner
  2. Open-drip proof electric motor
  3. Belt drive triplex crankshaft pump with solid ceramic pistons
  4. Thermal relief valve helps prevent pump damage
  5. Gas regulator
  6. LP-gas shut-off valve
  7. 35' electrical cord with ground fault circuit interrupter (GFCI) (20 amp plug on 1500 PSI models)
  8. Wand holder
  9. Reinforced powder coated cabinet-style steel frame
  10. Soid steel threaded axles
  11. Pneumatic tires with tubes
  12. 10' LP-Gas hose
  13. 3/8" x 50' steel wire braided pressure hose with quick connects, swivel and bend restrictors
  14. Professional-grade insulated trigger gun with safety lock-off
  15. 36" insulated lance with quick connect nozzles (0, 15, 25, 40 degress and detergent)
  16. Tank carrier with snug-fit band for 30lb. propane tanks
ADDITIONAL FEATURES:
  • Water output temperature is approximately 190 to 200°F
  • Water output temperature for "wet" steam is approximately 250°F
  • Operates at 350 PSI in steam mode
  • High limit temperature control for added safety
  • Easy access coil drain prevents freezing
  • Downstream low pressure chemical injector

Units available at 700 PSI / 2.3 GPM or 1500 PSI / 1.8 GPM

In the Dallas / Fort Worth Metroplex?

Call today to receive a free demo of the HLP Series machines.

Contact Marty Davis at Metro (817) 695-1660 for pricing deals.