1. Energy-efficient top-fired, dual spiral coil with powder coated heat exchanger
2. No.1 or No.2 diesel or kerosene fired burner
3. Complete system diagnostic board
4. Totally enclosed fan-cooled electric motor with manual thermal overload protection
5. Racor fuel filter/water separator
6. Polyethylene burner fuel tank
7. Direct drive triplex piston pump with ceramic plungers and forged brass manifold
8. Thermal relief valve
9. Stainless steel and brass unloader valve
10. Float tank (N/A on HSE-1002-0M11)
11. High pressure detergent injection (low pressure on HSE-1002-0M11)
12. Pressure and high limit safety controls
13. Reinforced powder coated steel tube frame
14. Powder coated center balanced lifting hook
15. Electric cord hanger
16. 35 foot power cord with ground fault circuit interrupter (GFCI)
17. Hose reel mounting bracket
18. Pneumatic tires with tubes
19. Solid steel threaded axles
20. Wand holder
21. 3/8" x 50' steel wire-braided pressure hose with screw connects, swivel and bend restrictors
22. Professional-grade insulated trigger gun with safety lock-off
23. Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzles

ADDITIONAL FEATURES:

• Temperature rise 150°F / 66°C maximum above ambient
• Easy coil drain
• Solid state electronic ignition
• Water output temperature is approximately 190 to 200° (all models except HSE 1002-SM10)
• Water output for "wet" steam is approximately 250° (HSE 1002-SM10 only)
• Operates at 650 PSi in steam mode (HSE-1002-SM10 only)
• Locking tire brake

OPTIONS **

• Auto start/stop
• Auto start/stop steam
• Hour meter
• Auto star/stop CAD cell
• Auto start/stop-steam CAD cell

**   Available on select HSE models