|
|
| |
E-Vap Systems
|
 |
| |
|
|
 |
Available
Models:
-
1500 (15 Gl/hour)
- 3000
(30 Gl/hour)
- 6000
(60 Gl/hour)
Pro Chem wastewater
evaporators are constructed of stainless or powder coated
steel for durability. Wastewater is pumped, batch fed or poured
into a Hydro-Vap evaporator. Non-emulsified oils are skimmed
and channeled to an external receptacle.
This
system has underfloor heating to handle high suspended solids.
The solids concentrate and remain in the evaporator.
It
is easy to use and the flat floor simplifies cleaning. There
is a three inch drain port on each system for convenient cleaning. |
|
|
| |
|
Evaporation is economic and reduces wastewater
disposal costs. Substantial cost savings can be generated
from reduced storage and handling fees, commercial waste hauling,
training, insurance compliance and potential fines associated
with wastewater spills.
All units are available in powder coated mild
or stainless steel with electric, propane or natural gas heat
sources. Standard equipment on each unit includes an oil skimmer
and down stream draft inducer. Each unit includes:
- a heat source (electric, natural gas or
liquid propane)
- adjustable thermostat
- redundant safety control systems
- oil skimmer
- vent stack
- exhaust fan, which also acts as a down
stream draft inducer in gas units
Wastewater is pumped, batch fed or poured into
a Hydro-Vap evaporator. Non-emulsified oils are skimmed and
channeled to an external receptacle. All Hydro-Vap units have
underfloor heating that handles a high suspended solids level.
The solids concentrate and remain in the evaporator for later
removal. Underfloor heating simplifies the solids removal because
the bottom is flat and sloped, and there are no immersion heaters
or heat tubes to clean around. There is also a three inch drain
port on each unit for convenient solids removal. |
| |
|
| |
|
| |
| |
|
right
|
|
