Evaporation is economic and reduces wastewater disposal costs. Substantial cost savings can be generated from reduced storage and handling fees, commercial waste hauling, training, insurance compliance and potential fines associated with wastewater spills.
All units are available in powder coated mild or stainless steel with electric, propane or natural gas heat sources. Standard equipment on each unit includes an oil skimmer and down stream draft inducer. Each unit includes:
- A heat source (electric, natural gas or liquid propane)
- Adjustable thermostat
- Redundant safety control systems
- Oil skimmer
- Vent stack
- Exhaust fan, which also acts as a down stream draft inducer in gas units
Wastewater is pumped, batch fed or poured into a Hydro-Vap evaporator. Non-emulsified oils are skimmed and channeled to an external receptacle. All Hydro-Vap units have underfloor heating that handles a high suspended solids level. The solids concentrate and remain in the evaporator for later removal. Underfloor heating simplifies the solids removal because the bottom is flat and sloped, and there are no immersion heaters or heat tubes to clean around. There is also a three inch drain port on each unit for convenient solids removal.
Available Models:
- 1500 (15 Gl/hour)
- 3000 (30 Gl/hour)
- 6000 (60 Gl/hour)
Pro Chem wastewater evaporators are constructed of stainless or powder coated steel for durability. Wastewater is pumped, batch fed or poured into a Hydro-Vap evaporator. Non-emulsified oils are skimmed and channeled to an external receptacle.
This system has underfloor heating to handle high suspended solids. The solids concentrate and remain in the evaporator. It is easy to use and the flat floor simplifies cleaning. There is a three inch drain port on each system for convenient cleaning.